Trailer Hitch and Hitch accessories


	All K-Series Multi-Hitches Interchangeable Balls Rated at 16,000 lbs. of pulling capacity Rated at 3,000 lbs. of vertical load Standard 4 hole rectangular mounting pattern (3-3/8" horizontal by 1-3/4" vertical) Solid Steel Cast No welds Safety Features Built-In pintle hitch wing to eliminate wedging in tight turns Design will not allow top to be locked in the open position Tested to Well Over the recommended limits

Multi-Hitch

K-200 (with 2" Ball)
K-201 (with 1-7/8" Ball)

K-300 (with 2-5/16" Ball)


	A Multi-Hitch is a combination pintle/ball hitch. The Multi-Hitch can be used to pull any equipment that utilizes the pintle hitch towing system. The Multi-Hitch can also be used to pull the more common ball towing system (i.e. a boat trailer). The Multi-Hitch is generally bolted to an adapter that slides into the 2" receiver on your vehicle. Approximately 17 lbs. Shipping Weight

Single Piece Trailer Hitch


	Combination pintle/ball hitch Interchangeable Balls Rated at 12,000 lbs of pulling capacity Rated at 2,500 lbs of vertical load Easily installs into a 2" square receiver Solid Steel Cast No Welds Approximately 20 lbs. Shipping Weight Limitation of 7,000 lbs. GTW with standard 2" ball included

   K-9200  (with 2" Ball)**
   K-9201  (with 1-7/8" Ball)
   K-9202  (with 2-5/16" Ball)

Flat Back Hitch


	Direct Install to Vehicle Hitch Plate Install into a 2" Square Receiver using a Square Tube Adapter 16,000 lbs. Gross Trailer Weight 3,000 lbs. Vertical Load Standard 1/2" Bolt Mounting Pattern (H: 3-3/8" by V: 1-3/4") 3-1/2" length, 8 lbs. length measured from plate front to ball hole center

   K-352  (with 2" Ball)
   K-353  (with 1-7/8" Ball)
   K-355  (with 2-5/16" Ball)

Ball Hitches - 9-1/4" Length*, 15 lbs.

K-102  (with 2" Ball)
K-103  (with 1-7/8" Ball)
K-105  (with 2-5/16" Ball)


	Easily Installs into a 2" Square Receiver 16,000 lbs. Gross Trailer Weight 3,000 lbs. Vertical Load * length measured from pinhole to ball hole center

Ball Hitches - 6-1/2" Length*, 12 lbs.

K-152  (with 2" Ball)
K-153  (with 1-7/8" Ball)
K-155  (with 2-5/16" Ball)


	Easily Installs into a 2" Square Receiver 16,000 lbs. Gross Trailer Weight 3,000 lbs. Vertical Load * length measured from pinhole to ball hole center

Double Ball Hitches


	Easily installs into a 2' square receiver Chrome finished towing balls Rated at 1,500 lbs. of vertical load 7-1/2" Length* 18 lbs. * Length measured from pin hole to ball

   K-520  2" Trailer Ball - 5,000 lbs. GTW
     2-5/16" Trailer Ball - 7,500 lbs. GTW

Triple Ball Hitches


	Easily installs into a 2" square receiver Chrome finished towing balls Rated at 1,500 lbs. of vertical load Length: 8" for 2" Ball, and 6 1/2" for 1 7/8" and 2 5/16" Balls Weight: 18lbs. Length measured from pin hole to ball

K-533 (with 1-7/8", 2" and 2 5/16" Ball Sizes)

Square Tube Adapters (For 2" Square Receivers)

K-650
For Standard Vehicles
4-1/4" length*, 9 lbs.

K-1250
For Extended Bumpers
9" length*, 15 lbs.

K-750
Allows a 5" Rise or 5-1/2" Drop**
5-1/4" length*, 15 lbs.

** when used with a K-352 - Flat Back Hitch
* length measured from plate front to pinhole center


	Easily Installs into 2" Square Receiver 16,000 lbs. Gross Trailer Weight No welds	3,000 lbs. Vertical Load Solid Steel Cast Standard 1/2" Bolt Mounting Pattern (3-3/8" horizontal by 1-3/4" vertical)

Square Tube Adapters (For 2 1/2" Square Receivers)


	5-1/4" length, 20lbs.* Allows a 5" Rise or 5-1/2" Drop** Easily installs into a 2-1/2" square receiver 16,000 lbs. Gross Trailer Weight No welds 3,000 lbs. Vertical Load Solid Steel Cast Standard 1/2" Bolt Mounting Pattern (3-3/8" horiz by 1-3/4" vert) * length measured from plate front to pinhole center ** when used with a K-352 - Flat Back Hitch

K-725

Pintle Hitch
K-1550 30,000 lbs. GTW 6,000 lbs. Vertical Load Approx. 11 lbs. Shipping Wt.